Srs, Já vi vários tópicos a respeito da configuração com o CLP Siemens mas já tentei de tudo e não consigo a comunicação entre o Elipse Scada e o CLP s7-1214 pelo driver Mprot.
Segue aqui parte do erro do log:
…
09/02/2017 16:26:45.141 (28C8) IOKIT CONNECTING…
09/02/2017 16:26:45.141 (28C8) SOCKET connecting socket to ‘192.168.0.1’ on port 102…
09/02/2017 16:26:45.146 (28C8) SOCKET socket connected to ‘192.168.0.1’ on port 102 (local port 62286)!
09/02/2017 16:26:45.146 (28C8) IOKIT CONNECTED!
09/02/2017 16:26:45.152 (26CC) TAG Tag(1.302.0.0).Validate = Tag(1.302.0.0.Blob:05415040) (type=10;flags=0)
09/02/2017 16:26:45.152 (26CC) DRIVER Iso-Tcp Protocol was selected.
09/02/2017 16:26:45.152 (28C8) IO TX: 03 00 00 16 11 E0 00 00 00 01 00 C0 01 09 C1 02 01 00 C2 02 01 01
09/02/2017 16:26:45.153 (28C8) IO RX: 03 00 00 16 11 D0 00 01 00 01 00 C0 01 09 C1 02 01 00 C2 02 01 01
09/02/2017 16:26:45.154 (28C8) IO TX: 03 00 00 19 02 F0 80 32 01 00 00 00 00 00 08 00 00 F0 00 00 01 00 01 03 C0
09/02/2017 16:26:45.205 (28C8) IO RX: 03 00 00 1B 02 F0 80 32 03 00 00 00 00 00 08 00 00 00 00 F0 00 00 01 00 01 00 F0
09/02/2017 16:26:45.205 (28C8) IO TX: 03 00 00 1F 02 F0 80 32 01 00 00 00 01 00 0E 00 00 04 01 12 0A 10 04 00 01 00 00 06 00 00 00
09/02/2017 16:26:45.211 (28C8) IO RX: 03 00 00 13 02 F0 80 32 02 00 00 00 01 00 00 00 00 81 04
09/02/2017 16:26:45.212 (26CC) DRIVER ISO1: Error in the application ID of the request
09/02/2017 16:26:45.212 (26CC) DRIVER ISO1: ERR_CODE Error!
09/02/2017 16:26:45.212 (26CC) TAG <== (0.060) Tag(1.302.0.0).ReadValue = ERROR (hr=80004005)
…